Number of views:
1000

Comprehensive test system of Electric resistance welding transformer

This test bench is mainly used to test the no-load and load characteristics of power transformers and distribution transformers. It can also conduct frequency multiplication induction and power frequency withstand voltage tests on the tested transformers.
Retail price
0.0
Market price
0.0
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
Product description
Parameters

1. Overview

The comprehensive test bench complies with relevant national standards such as GB/T4776, GB/T5169, GB/4285-1993.

This test bench is mainly used to test the no-load and load characteristics of power transformers and distribution transformers. It can also conduct frequency multiplication induction and power frequency withstand voltage tests on the tested transformers.

The measurement part of the device is controlled by a high-end microcontroller, and the digital display, no-load, short-circuit and other test data are synchronously sampled by the microcontroller, avoiding errors caused by separate readings of voltage, ammeter, and power meter and manual calculation in traditional test methods.

 

2. Test items

● Three-phase voltage effective value

● Three-phase current effective value

● Three-phase active power loss

● Three-phase reactive power loss

● Three-phase average voltage

●Three-phase voltage average

●Three-phase current average

● Total power, frequency

● No-load current percentage

● Impedance voltage percentage, power factor

● Dielectric strength

● Insulation resistance

● DC resistance

 

3. Conditions of use

This equipment should be used under the following conditions:

1. The installation height should not exceed 1,000 meters above sea level.

2. The surrounding medium temperature shall not be higher than +40 ℃ and not lower than –5 ℃.

3. The relative humidity of the air should not be higher than 85%.

4. There is no place with conductive dust and corrosive gas that damages metal and insulation.

5. Places without explosion hazard.

6. A place where there is no vibration and the vertical tilt does not exceed 5°.

Scan the QR code to read on your phone
We could not find any corresponding parameters, please add them to the properties table

Recommended Products

Transformation ratio and volt-ampere characteristic comprehensive tester
WJJC-20kV impact withstand voltage tester
WJDS-20A standard source
搜索
Search

Jinyuan wholeheartedly welcomes new and old customers to visit and guide, and sincerely hopes to share technology with you and create the future together!

CONTACT US

 

Telephone:027-87051278

Fax:027-87051228
Mail:whjydq_666@163.com

Address: Building 5, Donghu High tech Industrial Innovation Base, No. 9 Miaoshan Avenue, Jiangxia District, Wuhan City
 

Official public account

 Wuhan Jinyuan Electric Co., Ltd.

Mobile website

 Wuhan Jinyuan Electric Co., Ltd.

Copyright © Wuhan Jinyuan Electric Co., Ltd.  All rights reserved.      ICP:NO.17006198-1 

      This site supports IPv6 access  |  SEO